SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Forklift Part
Used Forklift Parts - In due course, lift truck components will wear and have to be replaced. Purchasing brand new parts can become a costly venture so one more idea is to acquire used lift truck parts. This can save much cash in the end. It is a good idea to buy used forklift components which have been remanufactured. These parts will guarantee that you are getting components that will work for a long time and be productive.
Worn or broken parts which are remanufactured are a very cost effective answer as opposed to rebuilding. With rebuilding parts, only the parts that are broken or worn out get changed, which means that other wearable parts could break down soon after purchase.
Remanufactured components are cleaned after being taken apart and have the unusable components replaced. This method can provide the best assurance for second-hand components. All wearable parts are replaced regardless of age or wear which is one more reason why remanufactured parts overall function so much better. Any part within the part is new and this provides much longer life to the used part. Depending on the forklift parts that are being redone, the cleaning process and the whole remanufacturing process would differ.
The engines are cleaned after a complete disassembly. Several engine components like for instance rings, pistons, spark plugs, filters, valves, and valve springs can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to guarantee that there are no noise, no oil pressure problems, no leaks or any vacuum.
Transmissions are oven cleaned, pressure washed, and disassembled. A thorough inspection is performed so as to check for any cracks. Bearings, bushings and seals are all replaced. Normally, the replacement components used on transmission parts meet OEM specifications.
A few forklift parts like for example the alternator, the water pump, torque converters, steer axles and the starter can be quite serviceable after worn components are replaced. The electronic control in the electric lift truck is maintained by the control card. This card can likewise be reproduced with replacing all aged and worn out parts. Unlike other lift truck parts the control card could only have the worn and aged components replaced.
Components that are remanufactured have to be meticulously examined upon reassembly to guarantee they are in good condition prior to being sold. When obtaining these parts, it is a good idea to be sure that they have undergone all of the proper testing and inspections. On certain larger parts like for instance transmissions, steer axles and engines, OEM specification replacement parts should be utilized.
The dealer of used lift trucks and parts could guarantee that the remanufactured parts have met OEM specifications and that these components meet industry standards. A lot of details go into remanufacturing used components. This attention to detail offers more serviceability out of remanufactured parts compared to the components that were only rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Toledo, Ohio
forkliftpartstoledo.com
Email Us
About Us